Centre of enlargement

GCSE Tutoring Programme

"Our chosen students improved 1.19 of a grade on average - 0.45 more than those who didn't have the tutoring."

Teacher-trusted tutoring

In order to access this I need to be confident with:

Arithmetic 2D shapes

This topic is relevant for:

GCSE Maths Geometry and Measure Transformations Enlargement

Centre Of Enlargement

Here we will learn about the centre of enlargement, including how to enlarge a shape about a point. We will also learn about fractional scale factors and negative scale factors.

There are also enlargement worksheets based on Edexcel, AQA and OCR exam questions, along with further guidance on where to go next if you’re still stuck.

What is centre of enlargement?

Centre of enlargement is a point which tells you where to draw an enlargement.

An enlargement is a type of transformation where we change the size of the original shape to make it bigger or smaller by multiplying it by a scale factor.

To use a centre of enlargement we need to draw lines from the centre of enlargement through the vertices of the original shape. These are called ray lines.

E.g.

Here triangle ABC has been enlarged by scale factor $2$ about a centre of enlargement point O.

The new triangle is labelled A’B’C’.

The lengths of the sides of the new shape are double the lengths of the sides of the original shape. The pairs of corresponding sides are parallel lines. The angles in the two shapes are the same and the triangles are similar triangles.

E.g.

Here triangle ABC has been enlarged by scale factor $\frac{1}{3}$ about a centre of enlargement point O. If an enlargement is between $0$ and $1$ the shape becomes smaller. The new triangle is labelled A’B’C’.

The lengths of the sides of the new shape are a third of the lengths of the sides of the original shape.

The pairs of corresponding sides are parallel lines.

The angles in the two shapes are the same and the triangles are similar triangles.

A transformation, such as an enlargement, is a type of mathematical mapping. So the term “maps” is often used in questions.

A mapping is a mathematical instruction and a transformation is a mathematical instruction which can be applied to a shape.

What is centre of enlargement?

Negative scale factors

Negative scale factors produce an image on the other side of the centre of enlargement with the shape upside down.

Negative scale factors in the higher GCSE only. These are an extension of positive scale factors.

E.g.

Triangle A has been enlarged by scale factor $-3$ about the point O.

Negative scale factors

How to enlarge a shape using a centre of enlargement

In order to enlarge a shape using a centre of enlargement:

Draw a ray line.
Mark the new point.
Mark the other new points.
Complete the shape.

How to enlarge a shape using a centre of enlargement

Centre of enlargement worksheet

Get your free centre of enlargement worksheet of 20+ questions and answers. Includes reasoning and applied questions.

DOWNLOAD FREE

Centre of enlargement worksheet

Get your free centre of enlargement worksheet of 20+ questions and answers. Includes reasoning and applied questions.

DOWNLOAD FREE

Centre of enlargement examples

Example 1: on a grid

Enlarge the triangle ABC by scale factor $2$ about the point O.

Draw a ray line.

Choose a point to start with. Point A is a good place to start as it is across from the centre of enlargement, point O. Draw a ray line from point O through point A and extend the line.

2Mark the new point.

Measure the distance from point O to point A. Multiply the distance by the scale factor $2.$ Measure this new distance from point O and put a mark for the new point.

OA’=2\times OA

3Mark the other new points.

Draw ray lines going through point B and point C. Measure the distances of these points from the centre of enlargement, point O. Multiply the distances by the scale factor 2. Measure these new distances from point O and put marks for the new points.

OB’=2\times OB

OC’=2\times OC

4Complete the shape.

Join up the points to make the new triangle A’B’C’.

Example 2: on a grid

Enlarge the triangle ABC by scale factor $\frac{1}{2}$ about the point O.

Draw a ray line.

Choose a point to start with. Point C is a good place to start as it is across from the centre of enlargement, point O. Draw a ray line from point O through point C and extend the line.

Mark the new points.

Measure the distance from point O to point C. Multiply the distance by the scale factor $\frac{1}{2}$ (or divide by $2$ ). Measure this new distance from point O and put a mark for the new point.

$OC’=\frac{1}{2}\times OC$

Mark the other new points.

Draw ray lines going through point B and point C. Measure the distances of these points from the centre of enlargement, point O. Multiply the distances by the scale factor $\frac{1}{2}.$ Measure these new distances from point O and put marks for the new points.

$OA’=\frac{1}{2}\times OA$

$OB’=\frac{1}{2}\times OB$

Complete the shape.

Join up the points to make the new triangle A’B’C’.

Example 3: on a coordinate grid

Enlarge the triangle ABC by scale factor $3$ about the point P $(8,8)$

Mark the centre of enlargement.

On the diagram mark the centre of enlargement. The centre of enlargement is point P.

Draw a ray line.

Choose a point to start with. Point A is a good place to start as it is straight down from the centre of enlargement, point P. Draw a ray line from point P through point A and extend the line.

Mark the new point.

Measure the distance from point P to point A. Multiply the distance by the scale factor $3.$ Measure this new distance from point P and put a mark for the new point.

PA’=3\times PA

Mark the other new points.

Draw ray lines going through point B and point C. Measure the distances of these points from the centre of enlargement, point P. Multiply the distances by the scale factor $3.$ Measure these new distances from point P and put marks for the new points.

PB’=3\times PB

PC’=3\times PC

Complete the shape.

Join up the points to make the new triangle A’B’C’.

Example 4: on a coordinate grid

Enlarge the triangle ABC by scale factor $\frac{1}{2}$ about O.

Mark the centre of enlargement.

On the diagram mark the centre of enlargement. The centre of enlargement is point O, the origin.

Draw a ray line.

Choose a point to start with. Point A is a good place to start as it is straight up from the centre of enlargement, point O. Draw a ray line from point O through point A and extend the line.

Mark the new point.

Measure the distance from point O to point A. Multiply the distance by the scale factor $\frac{1}{2}.$ Measure this new distance from point O and put a mark for the new point.

OA’=\frac{1}{2}\times OA

Mark the other new points.

OB’=\frac{1}{2}\times OB

OC’=\frac{1}{2}\times OC

Complete the shape.

Join up the points to make the new triangle A’B’C’.

How to find a centre of enlargement

In order to find a centre of enlargement:

Draw a ray line through a pair of points.
Draw more ray lines.
Write down the coordinates of the centre of enlargement.

Example 5: find a centre of enlargement

Triangle A has been enlarged to make triangle B.

Find the centre of enlargement.

Draw a ray line through a pair of points.

Find a pair of corresponding vertices and draw a ray line going through the points.

Draw more ray lines.

Find more pairs of corresponding vertices. Draw ray lines through the pairs of points.

Write down the coordinates of the centre of enlargement.

The point at which your ray lines meet will be the centre of enlargement.

The centre of enlargement is $(2,2)$

You may also be asked to find the scale factor of enlargement. For this example the scale factor of enlargement is $2.$ You can calculate the scale factor by choosing a pair of corresponding sides and dividing the enlarged length by the original length.

Scale \ factor = \frac{enlarged \ length}{ original \ length}=\frac{2}{1}=2

Example 6: find a centre of enlargement

Triangle A has been enlarged to make triangle B.

Find the centre of enlargement.

Draw a ray line through a pair of points.

Find a pair of corresponding vertices and draw a ray line going through the points.

Draw more ray lines.

Find more pairs of corresponding vertices. Draw ray lines through the pairs of points

Write down the coordinates of the centre of enlargement.

The point at which your ray lines meet will be the centre of enlargement.

The centre of enlargement is $(5,9)$

How to enlarge a shape using a negative scale factor (higher)

In order to enlarge a shape using a centre of enlargement on a coordinate grid:

Draw a ray line.
Mark the new point.
Mark the other new points.
Complete the shape.

Example 7: negative scale factor

Enlarge the triangle ABC by scale factor $-2$ about the point O

Draw a ray line.

Choose a point to start with. Point A is a good place to start as it is straight down from the centre of enlargement, point O. Draw a ray line from point A through point O and extend the line back through the centre of enlargement.

Mark the new point.

Measure the distance from point O to point A. Multiply the distance by $2,$ but since the scale factor is negative $2$ we mark the point A’ measuring backwards along the ray line from point O.

The ray line is like a number line where we have positive and negative numbers with $0$ in between.

$OA’=-2\times OA$

Mark the other new points.

Draw ray lines going through point B and point C. Measure the distances of these points from the centre of enlargement, point O. Multiply the distance by $2$ , but since the scale factor is negative $2$ we mark the new points’ measuring backwards along the ray line from point O.

Complete the shape.

Join up the points to make the new triangle A’B’C’.

Example 8: negative scale factor

Enlarge the triangle ABC by scale factor $-1$ about the origin.

Draw a ray line.

The centre of enlargement is O, the origin. Choose a point to start with. Let’s choose point A. Draw a ray line from point A through O and extend the line back through the centre of enlargement.

Mark the new point.

Measure the distance from point O to point A. Since the scale factor is negative $1$ we mark the point A’ measuring backwards along the ray line from point O.

The ray line is like a number line where we have positive and negative numbers with $0$ in between.

$OA’=-1\times OA$

Mark the other new points.

Draw ray lines going through point B and point C. Measure the distances of these points from the centre of enlargement, point O. Since the scale factor is negative $1$ we mark the new points measuring backwards along the ray line from point O.

Complete the shape.

Join up the points to make the new triangle A’B’C’.

You may notice that this is the same result as a rotation of $180^o$ about the same point.

Common misconceptions

Accuracy

Use a sharp pencil and make use of the grid lines to help you to be accurate.

Extend your ray lines

Remember that the ray lines can be extended as far as needed.

Draw multiple ray lines

It is a good idea to draw at least $3$ ray lines to make sure you find the correct centre of enlargement.

Position of the centre of enlargement

Remember the centre of enlargement can be within the shape.

E.g.

Centre of Enlargement Common Misconceptions Image 1

The origin

The origin of a coordinate grid has the coordinates $(0,0)$ . It is commonly denoted as O. It is used often as the centre of enlargement.

Objects and images

The original shape is known as an object. The enlarged shape is known as an image. They can overlap.

Centre of Enlargement Common Misconceptions Image 2

Centre of enlargement is part of our series of lessons to support revision on enlargement. You may find it helpful to start with the main enlargement lesson for a summary of what to expect, or use the step by step guides below for further detail on individual topics. Other lessons in this series include:

Practice centre of enlargement questions

Centre of Enlargement Practice Question 1 Answer 2

Centre of Enlargement Practice Question 1 Answer 1

Centre of Enlargement Practice Question 1 Answer 3

Centre of Enlargement Practice Question 1 Answer 4

Draw ray lines to make sure you get the enlarged triangle in the correct position. The sides of the enlarged triangle should be $3$ times bigger than the original shape.

Centre of Enlargement Practice Question 1 Explanation Image

Centre of Enlargement Practice Question 2 Answer 2

Centre of Enlargement Practice Question 2 Answer 3

Centre of Enlargement Practice Question 2 Answer 4

Centre of Enlargement Practice Question 2 Answer 1

Draw ray lines to make sure you get the enlarged triangle in the correct position. The scale factor is $2$ , so each of the sides of the enlarged triangle should be double the sides of the original triangle.

Centre of Enlargement Practice Question 2 Explanation Image

Centre of Enlargement Practice Question 3 Answer 1

Centre of Enlargement Practice Question 3 Answer 2

Centre of Enlargement Practice Question 3 Answer 3

Centre of Enlargement Practice Question 3 Answer 4

Draw ray lines to make sure you get the enlarged triangle in the correct position. The scale factor is $3$ , so each of the sides of the enlarged triangle should be $3$ times bigger than the sides of the original triangle

Centre of Enlargement Practice Question 3 Explanation Image

Centre of Enlargement Practice Question 4 Answer 2

Centre of Enlargement Practice Question 4 Answer 1

Centre of Enlargement Practice Question 4 Answer 3

Centre of Enlargement Practice Question 4 Answer 4

The point O is the origin. Draw ray lines to make sure you get the enlarged triangle in the correct position. The scale factor is $\frac{1}{2}$ so the triangle gets smaller.

Centre of Enlargement Practice Question 4 Explanation Image

(0,0)

(1,0)

(1,1)

(0,1)

Draw ray lines through pairs of corresponding points. Draw all $3$ of them to make sure you get the correct point

Centre of Enlargement Practice Question 5 Explanation Image

(1,10)

(2,9)

(2,10)

(1,9)

Draw ray lines through pairs of corresponding points. Draw all $3$ of them to make sure you get the correct point

Centre of Enlargement Practice Question 6 Explanation Image

Centre of enlargement GCSE questions

1. On the grid, enlarge the shape with scale factor $3,$ centre O.

Centre of Enlargement GCSE Question 1

(3 marks)

Show answer

Centre of Enlargement GCSE Question 1 Image 2

For one correct vertex

(1)

For second correct vertex

(1)

For fully correct triangle

(1)

2. Enlarge the shape with scale factor $\frac{1}{2}$ centre $(1,1).$

Centre of Enlargement GCSE Question 2

(3 marks)

Show answer

Centre of Enlargement GCSE Question 2 Image 2

For one correct vertex

(1)

For second correct vertex

(1)

For fully correct triangle

(1)

3. Describe fully the single transformation that maps shape A onto shape B.

Centre of Enlargement GCSE Question 3

(3 marks)

Show answer

Centre of Enlargement GCSE Question 3 Image 2

Enlargement

For stating that it is an enlargement

(1)

Scale factor 2

For the correct scale factor

(1)

About ( $0,0$ )

For the correct coordinates of the centre of enlargement

(1)

Learning checklist

You have now learned how to:

Use a centre of enlargement to enlarge a shape on a grid

Use a centre of enlargement to enlarge a shape with a fractional scale factor

Find a centre of enlargement

Use a centre of enlargement to enlarge a shape with a negative scale factor (higher)

The next lessons are

Still stuck?

Prepare your KS4 students for maths GCSEs success with Third Space Learning. Weekly online one to one GCSE maths revision lessons delivered by expert maths tutors.